SD Copy Machine (SD Card Cloner) – Intelligent 9 Golden Series
SD Copy Machine; SD Card Cloner
U-Reach Intelligent 9 Series SD Copy Machine is a professional SD Card Cloner. It handles copy job of memory card easily.
SD and MicroSD Memory Card Duplicator
-Intelligent 9 Golden Series
Standalone, no PC required to operate the SD/MicroSD duplicator.
Impeccable copy speed: up to 2GB per min for each port and up to 64 ports.
Supports all types of data format copying while doing bit-for-bit duplication.
Supports “quick copy” for Linux (ext2/ext3/ext4), NTFS and FAT16/32/exFAT.
Supports durability test.
Supports hardware-level write protection for both SD and MicroSD Cards (device must support write protection).
U-Reach Intelligent 9 Series is a professional SD and MicroSD card duplicator, specially designed for high volume duplication. It is adopted a unique multitasking technology that can simultaneously copy up to 63 memory cards with 2 GB/min transfer speed. It’s developed by native SD command and compatible with all SD and MicroSD devices on the market.
2 Copy Modes
 | Quick Copy | The duplicator automatically copies only the data area, supports FAT16/32/exFAT, Windows (NTFS), Linux (Ext2/Ext3/Ext4), and Mac (HFS, HFS+, HFSX). |
|---|---|---|
 | Whole Media | The duplicator copies from the initial sector to the end, bit-by-bit. |
Transfer Speed
Highest speed memory card Duplication /Inspection Equipment in the industry. Maximum copying speed of one single port can be up to 2 GB/min.
Swappable Modular Sockets
The handscrew attached faceplates and replaceable sockets make maintenance quick and convenient.
Quality Testing / Checking Functions
H3 test | Determines if the flash is readable. This test will not modify pre-existing data. After checking, the machine will show not only the test result but also Bad Sector Quantity and Read Speed. |
|---|---|
H5 test | Overwrites machine-generated values to all sectors in the NAND flash, and verifies them to determine quality. After checking, the machine will show not only the test result but also Bad Sector Quantity, Read Speed and Write Speed. |
H6 test | Resembling the H5 test, it overwrites machine generated-values only to the empty sectors without disturbing pre-existing data, partitions, and formats. After checking, the machine will show not only the test result but also Bad Sector Quantity, Read Speed and Write Speed. |
Burn-in test | Performs user-defined burn-in tests to flash devices from 30 minutes through 30 days to determine quality and longevity. |
Double Source Comparison
Double source comparison can eliminate the chance of a duplication error caused by a worn source. Use the first port as a copying source and use the second port as a compare source. It can guarantee the highest reliability and 100% correctness of the duplication result.
Sanitization Functions
Erase Functionality Compliant with NIST SP 800-88r1 and DoD 5220-M Standards.
Mass Duplicate Write-protected Memory Cards
Requires SD or MicroSD card(s) which follows the standard SD command. Easy 2 steps to copy data into SD and MicroSD card(s) and set the whole area of Nand Flash to write-protected. After setting, the memory card(s) will become anti-format and the data become non-deletable.
Real-Time Monitoring
Monitor real-time status via PC through USB cable link.
Event Log report
The U-Reach Golden Series duplicator provides an essential tool for production quality remote control and yield analysis.
It records the operation results and other information of each device completely.
| Models | SD908G / SD916G / SD924G / SD932G / SD940G / SD964G | ||
| Specifications | |||
| Max. Transfer Speed | 2 GB/min. (33 MB/sec.) *Actual performance is dependent on device transfer rate. | ||
| Supported Formats | Whole Media: copies all types of formats, both known and unknown. | ||
| Quick Copy: copies FAT16/32/exFAT, Windows (NTFS), Mac (HFS/HFS+/HFSX), and Linux (ext2/ext3/ext4). | |||
| Operating Type | Stand-alone, non PC-based operation | ||
| Language Support | English, Japanese | ||
| LCD Display | Backlit Monochrome LCD Display | ||
| LEDs | 2 LED Indicators per Port: Green (Pass), Red (Fail) | ||
| Control Panel | 4 Push Buttons (▲, ▼, OK, ESC) | ||
| Features | Copy Modes | Quick Copy (System and Files), Whole Media | |
| Compare Function | Bit-for-bit data comparison. | ||
| Diagnostic Modes | H3 read test | ||
| H5 read/ write test | |||
| H6 read/ write test | |||
| Format Function | Formats device to FAT16 or FAT32. | ||
| Sanitization Modes | Quick Erase, Full Erase and DoD Erase | ||
| Special Features | PC Monitoring | Real-time status monitoring through PC | |
| Log Report Management | Event log reports are generated through the first port and saved to the SD device. | ||
| Burn-in Test | Choose durations ranging from 30 minutes to 30 days. | ||
| Write Protect | Requires SD and MicroSD card(s) which is following the standard SD command. | ||
| Compatibilities | Direct Supported Device | SD memory card & MicroSD memory card, SDHC, SDXC | |
| Supported OS | All (Windows, Mac, Linux, and other stand-alone systems). | ||
Hardware Specifications | Power Supply | 12V DC Adapter | |
| Temperature Range | Operating Temperatures: 0°C ~ 60°C Storage Temperatures: -20°C ~ 85°C | ||
| Humidity Range | Working Humidity: 20% ~ 80% Storage Humidity: 5% ~ 95% | ||
| Certification | FCC, CE, RoHS | ||
**Specifications subject to change without notice.
| Function List for Intelligent9-SD Golden Series | ||
|---|---|---|
| 1. Copy | ||
| 2. Compare | ||
| 3. Copy & Compare | ||
| 4. Media Check | 1. H3 Safe | |
| 2. H5 RW | ||
| 3. H6 SafeRW | ||
| 4. Setup Range % | ||
| 5. Setup Range MB | ||
| 6. Set Error Limit | ||
| 7. Minimum Read Speed | ||
| 8. Minimum Write Speed | ||
| 9. Low Speed Tolerance Time | ||
| 10. Set Capacity Limit | ||
| 11. Set Loop Count | ||
| 5. Information | 1. SD Card Info. | |
| 2. System Info. | ||
| 6. Utility | 1. Do Format | 1. Auto Format |
| 2. FAT16 Format | ||
| 3. FAT32 Format | ||
| 4. Set FAT 16 Cluster Size | ||
| 5. Set FAT 32 Cluster Size | ||
| 2. Measure Speed | ||
| 3. Capacity Check | ||
| 4. Quick Erase | ||
| 5. Full Erase | ||
| 6. DoD Erase | ||
| 7. System Update | ||
| 8. Calc. Checksum | ||
| 9. Calc. CRC64 | ||
| 10. A2 Fake Picker | ||
| 11. Release Protect SD | ||
| 7. Setup | 1. Start-up Menu | |
| 2. Copy Area | System and Files | |
| Whole Media | ||
| 3. Button Sound | ||
| 4. Target Tolerance | ||
| 5. Asynchronous | ||
| 6. Check Before Copy | ||
| 7. Power Off Time Between Copy+Compare | ||
| 8. Auto Start After Fill Device | ||
| 9. Check MID/OID/PNM Language | ||
| 10. Language | ||
| 11. Select Speed | ||
| 12. Check WP Switch | ||
| 13. Purge Before Copy | ||
| 14. Monitor Device After Copy | ||
| 15. Adjust Clock | ||
| 16. Use Port 2 as Compare Source | ||
| 17. Minimum Speed | ||
| 18. Advanced Setup | 1. LED in Factory Mode | |
| 2. Erase Master Port | ||
| 3. Do Erase, Format Before Copy | ||
| 19. Set to Default | ||
| 8. Burn-In | 1. Burn-In (Copy+Comp) | |
| 2. Burn-In (Auto Data) | ||
| 3. Set Burn Time | ||
| 4. Set Loop Count | ||
| 5. Set Test Range | ||
| 6. Set Bad Limit | ||
| 7. Set Data Pattern | ||
| 8. Compare Count Per Loop | ||
| 9. Power Off Between Loop | ||
| 10. Compare Count Per Copy | ||
| 9. Log Manager | 1. Out Today Report | |
| 2. Out Recent Report | ||
| 3. Out Period Date | ||
| 4. Advanced Function | 1. Clear ALL Log | |
| 2. Setup Password | ||
| 10. Normal Write Protect | 1. Copy | |
| 2. Copy+Compare | ||
| 3. Show Protect Info | ||
| 4. Set Card Protect | ||
| 11. Permanent Write Protect | 1. Copy | |
| 2. Copy+Compare | ||
| 3. Show Protect Info | ||
| 4. Set Card Protect | ||
Videos for Intelligent9 – SD Series
U-Reach Intelligent 9 Series is a professional SD and MicroSD card duplicator, specially designed for high volume duplication. It is adopted a unique multitasking technology that can simultaneously copy up to 63 memory cards with 2 GB/min transfer speed. It’s developed by native SD command and compatible with all SD and MicroSD devices on the market.
2 Copy Modes
| Quick Copy | The duplicator automatically copies only the data area, supports FAT16/32/exFAT, Windows (NTFS), Linux (Ext2/Ext3/Ext4), and Mac (HFS, HFS+, HFSX). |
|---|---|---|
| Whole Media | The duplicator copies from the initial sector to the end, bit-by-bit. |
Transfer Speed
Highest speed memory card Duplication /Inspection Equipment in the industry. Maximum copying speed of one single port can be up to 2 GB/min.
Swappable Modular Sockets
The handscrew attached faceplates and replaceable sockets make maintenance quick and convenient.
Quality Testing / Checking Functions
H3 test | Determines if the flash is readable. This test will not modify pre-existing data. After checking, the machine will show not only the test result but also Bad Sector Quantity and Read Speed. |
|---|---|
H5 test | Overwrites machine-generated values to all sectors in the NAND flash, and verifies them to determine quality. After checking, the machine will show not only the test result but also Bad Sector Quantity, Read Speed and Write Speed. |
H6 test | Resembling the H5 test, it overwrites machine generated-values only to the empty sectors without disturbing pre-existing data, partitions, and formats. After checking, the machine will show not only the test result but also Bad Sector Quantity, Read Speed and Write Speed. |
Burn-in test | Performs user-defined burn-in tests to flash devices from 30 minutes through 30 days to determine quality and longevity. |
Double Source Comparison
Double source comparison can eliminate the chance of a duplication error caused by a worn source. Use the first port as a copying source and use the second port as a compare source. It can guarantee the highest reliability and 100% correctness of the duplication result.
Sanitization Functions
Erase Functionality Compliant with NIST SP 800-88r1 and DoD 5220-M Standards.
Mass Duplicate Write-protected Memory Cards
Requires SD or MicroSD card(s) which follows the standard SD command. Easy 2 steps to copy data into SD and MicroSD card(s) and set the whole area of Nand Flash to write-protected. After setting, the memory card(s) will become anti-format and the data become non-deletable.
Real-Time Monitoring
Monitor real-time status via PC through USB cable link.
Event Log report
The U-Reach Golden Series duplicator provides an essential tool for production quality remote control and yield analysis.
It records the operation results and other information of each device completely.
Videos for Intelligent9 – SD Series