SATA HDD Eraser With no License Fee – MT-G Series
MT-G is a SATA HDD Eraser specially designed for Hard Disk Recycle industry. It erase SATA device without license fee. Lean more…
SSD Sanitizer (Data Eraser) – MT-G Series
More than 5 Data Sanitization Functions: Full erase, DoD erase and Secure erase, comply with NIST SP 800-88r1 and DoD 5220-M Standards.
Log report records detail of all erase tasks for audit purpose.
Free licensing, no extra cost per erase.
Speed transfers of up to 9.0GB per minute.
Supports 2.5″, 3.5″ SATA HDD, SSD and IDE HDD via IDE_SATA convertor. (IDE to SATA adapter-TB1529 is optional)
Supports multiple SATA I/II/III and 4Kn HDD interface with its open platform design.
Features an optional connection for real-time monitoring on a PC.
U-Reach MT-G series is a professional SATA HDD Eraser, specially designed for Hard Disk recycle industry. It erase SATA device without license fee. With U-Reach’s unique multitasking technology, it’s capable to wipe out data synchronously up to 24 devices at 9.0 GB per minute. There are more than 5 sanitization modes which are complying with NIST or DoD standards and have been adopted by many countries’s government, army or international institutes. In addition, the MT-G sanitizer is equipped with some copy functions, the quick copy mode copies data and skips blank area. NTFS, Linux (Ext2/Ext3/Ext4), FAT (16/32/exFAT), and Mac (HFS, HFS+, HFSX) formats are all supported with quick copy mode.
Sanitize Functions
Full Erase | Erases entire device(s), complying with NIST SP 800-88r1 (Clear) Standards. |
|---|---|
DoD Erase | Erases device(s), complying with DoD 5220.22-M Standards. |
DoD Erase + Compare | Erases device(s), complying with DoD 5220.22-M Standards and verifies complete erasure. |
7-Pass Erase | Erases device(s) 7 times complying with DoD 5220.22-M(ECE) Standards. |
Secure Erase | Erases the non-loadable areas complying with NIST SP 800-88r1 (Purge) Standards. |
US Army AR 380-19 | Erases device(s) complying with “Army Regulation 380-19” by the US Army. |
Transfer Speed
U-Reach MT-G sanitizer transfers up to 9.0 GB/min on all devices simultaneously, without any speed degradation as the number of targets increases.
Skip Bad Sectors
End-users are given options to skip bad sectors during erase devices.
Event Log Report
U-Reach Log Report records all detail information of erase job and easy to output and store by an USB pen drive. It is an important tool for audit purpose.
Modular Cable Design
When cables wear out, users can quickly swap them out, saving time and money.
Optional Adapters Supported
Support All types of SATA interface via different adapters.
Copy Functions
 | Quick Copy | The duplicator automatically copies only the data area, supports Windows (FAT16/32/exFAT/NTFS), Linux (ext2/ext3/ext4/LVM), and Mac (HFS/HFS+/HFSX). |
|---|---|---|
 | Whole Media | The duplicator copies from the initial sector to the end, bit-by-bit. |
 | All Partitions | The duplicator copies all the partitions and skips undefined area. |
 | Percentage | Sets percentage of source capacity to copy. |
| Models | MT800G / MT1600G / MT2400G | ||
| Specifications | |||
| Max. Transfer Speed | 9.0 GB/min. (150MB/sec.) *Actual performance is dependent on device transfer rate. | ||
| Supported Formats | All Partitions/Whole HDD/Percentage: copies all types of formats, both known and unknown. | ||
| Quick Copy: copies FAT16/32/exFAT, Windows (NTFS), Mac (HFS/HFS+/HFSX), and Linux (ext2/3/4). | |||
| Operating Type | Stand-alone, non PC-based operation | ||
| Language Support | English, Japanese | ||
| LCD Display | Backlit Monochrome LCD Display | ||
| LEDs | 3 LED Indicators per Port: Yellow (Power), Green (Pass), Red (Fail) | ||
| Control Panel | 4 Push Buttons (▲, ▼, OK, ESC) | ||
| Features | Sanitization Modes | Full Erase, DoD Erase, DoD Erase+Compare, 7-Pass Erase, Secure Erase, NSA Erase and US Army AR 380-19 | |
| Skip Bad-Sectors | Manually set (Bad sector) threshold range to skip during erase and copy process. | ||
| Erase Certificate | Erase logs generated through the USB port and saved to USB devices. | ||
| PC Monitoring | Real-time status monitoring through PC. | ||
| SpecialFeatures | Copy Modes | Quick Copy, All Partitions Copy, Whole HDD Copy, and Percentage Copy | |
| Compare Function | Bit-for-bit data comparison. | ||
| Compatibilities | OS Supported | All (Windows, Linux, and other stand-alone systems) | |
| Compatible Interfaces | w/o Adapters | 1.8″/2.5″/3.5” SATA HDDs and SSDs | |
| w/ Adapters | IDE, microSATA, mSATA, eSATA, SATA M.2(NGFF) and CFast | ||
| Advanced Formats | Supports MBR, GPT, and advanced formats. | ||
Hardware Specifications | Power Supply | Selectable Voltage 115V or 230V, 50/60Hz | |
| Temperature Range | Operating Temperatures: 5°C ~ 45°C (41°F ~ 113°F) Storage Temperatures: -20°C ~ 85°C (-4°F ~ 185°F) | ||
| Humidity Range | Working Humidity: 20% ~ 80% Storage Humidity: 5% ~ 95% | ||
| Certification | FCC, CE, RoHS | ||
**Specifications subject to change without notice.
| Function List for MT Series | |||||
|---|---|---|---|---|---|
| 1.Copy | |||||
| 2.Compare | |||||
| 3.Copy+Compare | |||||
| 4.Erase | 1. Quick Erase | ||||
| 2. Full Erase | |||||
| 3. DoD Erase | |||||
| 4. DoD EraseComp | |||||
| 5. 7-Pass Erase | |||||
| 6. Secure Erase | |||||
| 7. Enhanced Secure Erase | |||||
| 8. US Army AR380-19 | |||||
| 5. Utility | 1. Show Device Info | ||||
| 2. Update System | |||||
| 3. System Info. | |||||
| 4. Verify HDD | |||||
| 5. Strict Verify HDD | |||||
| 6. Setup | 1. Start-up Menu | ||||
| 2. Copy Area | System and Files | ||||
| ALL Partitions | |||||
| Whole HDD | |||||
| Percentage(%) | |||||
| Deep Analysis | |||||
| 3. Copy GPT Backup Area | |||||
| 4. Skip Bad Sectors | |||||
| 5. Minimum Speed | |||||
| 6. Check Source Minimum Speed | |||||
| 7. Language | |||||
| 8. Advanced Setup | 1. Unknown Format | ||||
| 2. Erase Master | |||||
| 3. Erase Pattern | |||||
| 4. Skip Erase Errors | |||||
| 5. Wait HDD Time | |||||
| 6. Lock Key | |||||
| 7. HPA Copy Mode | |||||
| 8. Clear HPA at ERASE | |||||
| 9. Mark after ERASE | |||||
| 10. Transfer Rate | |||||
| 11. Stop Motor Time | |||||
| 12. Bytes Per Cmd | |||||
| 13. Delete Disk Signature After Copy | |||||
| 9. Restore Defaults | |||||
| 7. Log Manager | 1. Out Today Report | ||||
| 2. Out Recent Report | |||||
| 3. Out Period Date | |||||
| 4. Advanced Function | 1. Clear ALL Logs | ||||
| 2. Setup Password | |||||
| 3. Adjust Clock | |||||
| 4. Add Watermark at text File | |||||
U-Reach MT-G series is a professional SATA HDD Eraser, specially designed for Hard Disk recycle industry. It erase SATA device without license fee. With U-Reach’s unique multitasking technology, it’s capable to wipe out data synchronously up to 24 devices at 9.0 GB per minute. There are more than 5 sanitization modes which are complying with NIST or DoD standards and have been adopted by many countries’s government, army or international institutes. In addition, the MT-G sanitizer is equipped with some copy functions, the quick copy mode copies data and skips blank area. NTFS, Linux (Ext2/Ext3/Ext4), FAT (16/32/exFAT), and Mac (HFS, HFS+, HFSX) formats are all supported with quick copy mode.
Sanitize Functions
Full Erase | Erases entire device(s), complying with NIST SP 800-88r1 (Clear) Standards. |
|---|---|
DoD Erase | Erases device(s), complying with DoD 5220.22-M Standards. |
DoD Erase + Compare | Erases device(s), complying with DoD 5220.22-M Standards and verifies complete erasure. |
7-Pass Erase | Erases device(s) 7 times complying with DoD 5220.22-M(ECE) Standards. |
Secure Erase | Erases the non-loadable areas complying with NIST SP 800-88r1 (Purge) Standards. |
US Army AR 380-19 | Erases device(s) complying with “Army Regulation 380-19” by the US Army. |
Transfer Speed
U-Reach MT-G sanitizer transfers up to 9.0 GB/min on all devices simultaneously, without any speed degradation as the number of targets increases.
Skip Bad Sectors
End-users are given options to skip bad sectors during erase devices.
Event Log Report
U-Reach Log Report records all detail information of erase job and easy to output and store by an USB pen drive. It is an important tool for audit purpose.
Modular Cable Design
When cables wear out, users can quickly swap them out, saving time and money.
Optional Adapters Supported
Support All types of SATA interface via different adapters.
Copy Functions
| Quick Copy | The duplicator automatically copies only the data area, supports Windows (FAT16/32/exFAT/NTFS), Linux (ext2/ext3/ext4/LVM), and Mac (HFS/HFS+/HFSX). |
|---|---|---|
| Whole Media | The duplicator copies from the initial sector to the end, bit-by-bit. |
| All Partitions | The duplicator copies all the partitions and skips undefined area. |
| Percentage | Sets percentage of source capacity to copy. |