SAS / SATA Hard Disk Sanitizer (Data Wiper) – SA250
Hard Disk Sanitizer; Data Wiper
SA250 is a Hard Disk Sanitizer and Data Wiper. It has 5 Erase Functions and supports asynchronous erase mode.
Visit here for duplication functions.
SAS / SATA Hard Disk and SSD Sanitizer (Data Wiper) – SA250
5 Data Sanitization Functions: Full erase, DoD erase and Secure erase, comply with NIST SP 800-88r1 and DoD 5220-M Standards.
Log report records detail of all erase tasks for audit purpose.
Free licensing, no extra cost per erase.
Supports 2.5″, 3.5″ SATA HDD / SSD and IDE HDD via IDE_SATA convertor. (IDE to SATA adapter-TB1529 is optional)
Supports multiple HDD / SSD interfaces with its open platform design.
Fast Erase Key enables the end-user to perform erase functions asynchronously.
Sanitize Functions
Full Erase | Erases entire device(s), complying with NIST SP 800-88r1 (Clear) Standards. |
|---|---|
DoD Erase | Erases device(s), complying with DoD 5220.22-M Standards. |
DoD Erase + Compare | Erases device(s), complying with DoD 5220.22-M Standards and verifies complete erasure. |
7-Pass Erase | Erases device(s) 7 times complying with DoD 5220.22-M(ECE) Standards. |
Secure Erase | Erases the non-loadable areas complying with NIST SP 800-88r1 (Purge) Standards. |
Skip Bad Sectors
End-users are given options to skip bad sectors during erasing device(s).
Event Log Report
U-Reach Log Report records all detail information of erase job and easy to output and store by an USB pen drive. It is an important tool for audit purpose.
Print Out Erase Report (Optional)
Fast Erase Key enables the end-user to perform erase functions asynchronously.
Fast Erase Key
Fast Erase Key enables the end-user to perform erase functions asynchronously.
Optional Adapters Supported
Support All types of SATA interface via different adapters.
Copy Functions
 | Quick Copy | Automatically copies only the data area:
|
|---|---|---|
 | Whole Media | The duplicator copies from the initial sector to the end, bit-by-bit. |
 | All Partitions | The duplicator copies all the partitions and skips undefined area. |
 | Percentage | Sets percentage of source capacity to copy. |
| Models | SA250 | ||
| Specifications | |||
| Max. Transfer Speed | 18 GB/min. (300 MB/sec.) *Actual performance is dependent on device transfer rate. | ||
| Operating Type | Stand-alone, non PC-based operation | ||
| Language Support | English, Japanese | ||
| LCD Display | Backlit Monochrome LCD Display | ||
| LEDs | 3 LED Indicators per Port: Yellow (Power), Green (Pass), Red (Fail) | ||
| Control Panel | 4 Push Buttons (▲, ▼, OK, ESC) | ||
| Features | Sanitization Modes | Full Erase, DoD Erase, Secure Erase and 7-Pass Erase | |
| Skip Bad-Sectors | Manually set (Bad sector) threshold range to skip during erase and copy process. | ||
| Erase Certificate | Erase logs generated through the USB port and saved to USB devices. | ||
| Special Features | Copy Modes | Quick Copy, All Partitions Copy, Whole HDD Copy, and Percentage Copy | |
| Compare Function | Bit-for-bit data comparison. | ||
| Compatibilities | OS Supported | All (Windows, Linux, and other stand-alone systems) | |
| Compatible Interfaces | w/o Adapters | SAS HDDs and SATA HDDs / SSDs | |
| w/ Adapters | IDE, microSATA, mSATA, eSATA, SATA M.2(NGFF) and CFast | ||
| Advanced Formats | Supports MBR, GPT, and advanced formats. | ||
Hardware Specifications | Power Supply | Selectable Voltage 115V or 230V, 50/60Hz | |
| Temperature Range | Operating Temperatures: 5°C ~ 45°C (41°F ~ 113°F) Storage Temperatures: -20°C ~ 85°C (-4°F ~ 185°F) | ||
| Humidity Range | Working Humidity: 20% ~ 80% Storage Humidity: 5% ~ 95% | ||
| Certification | FCC, CE, RoHS | ||
**Specifications subject to change without notice.
| Function List for SA250 | ||
|---|---|---|
| 1. Quick Erase | ||
| 2. Full Erase | ||
| 3. DoD Erase | ||
| 4. DoD EraseComp | ||
| 5. Secure Erase | ||
| 6. 7 Pass Erase | ||
| 7. Utility | 1. Copy | |
| 2. Compare | ||
| 3. Copy+Compare | ||
| 4. Show Disk Info. | ||
| 5. Show System Info. | ||
| 6. System Update | ||
| 8. Setup | 1. Start-up Menu | |
| 2. Copy Area | System and Files | |
| All Partitions | ||
| Whole HDD | ||
| Percentage (%) | ||
| Sector Copy | ||
| 3. Skip Errors | ||
| 4. Erase Pattern | ||
| 5. Mark After Erase | ||
| 6. Restore Default | ||
| 9. Log Manager | 1. Out Today Report | |
| 2. Out Recent Report | ||
| 3. Out Period Date | ||
| 4. Advanced Function | 1. Clear ALL Log | |
| 2. Setup Password | ||
| 3. Adjust Clock | ||
| 4. Add Watermark at text File | ||
Sanitize Functions
Full Erase | Erases entire device(s), complying with NIST SP 800-88r1 (Clear) Standards. |
|---|---|
DoD Erase | Erases device(s), complying with DoD 5220.22-M Standards. |
DoD Erase + Compare | Erases device(s), complying with DoD 5220.22-M Standards and verifies complete erasure. |
7-Pass Erase | Erases device(s) 7 times complying with DoD 5220.22-M(ECE) Standards. |
Secure Erase | Erases the non-loadable areas complying with NIST SP 800-88r1 (Purge) Standards. |
Skip Bad Sectors
End-users are given options to skip bad sectors during erasing device(s).
Event Log Report
U-Reach Log Report records all detail information of erase job and easy to output and store by an USB pen drive. It is an important tool for audit purpose.
Print Out Erase Report (Optional)
Fast Erase Key enables the end-user to perform erase functions asynchronously.
Fast Erase Key
Fast Erase Key enables the end-user to perform erase functions asynchronously.
Optional Adapters Supported
Support All types of SATA interface via different adapters.
Copy Functions
| Quick Copy | Automatically copies only the data area:
|
|---|---|---|
| Whole Media | The duplicator copies from the initial sector to the end, bit-by-bit. |
| All Partitions | The duplicator copies all the partitions and skips undefined area. |
| Percentage | Sets percentage of source capacity to copy. |