M.2 SSD Inspector (M.2 Burn-in Test Tool)
U-Reach PE Series is a M.2 SSD tester. It supports burn-in test and reports SMART Info, bad sector and speed of the device.
Previous slide
Next slide
M.2 SSD Inspector / Quality Check Tool
PE-HB Series
Read / Write Speed Test
Bad Sector Scanning
Real Capacity Check
Life Test
Quality Check Report
Product Description
Specification
Function List
Video
Product Description
The quality of SSD on the market varies greatly. It does not matter if you are a buyer or seller of pen drives, you would need an efficient way to exam/ sort out the quality level of SSD devices. U-Reach provides Burn-in Examinations to satisfy the need of quality checking. Our solution applies multi-core transfer technology. Thus, compare to PC, the QC performance will highly increase with less labor cost.
Event Log Report is an important asset Management tool to assist users in monitoring and recording the whole quality checking process. It records all details of each task. For example, checking function, working time, model number, serial number of media, read speed and write speed, results…etc. To provide log report as a quality proof is capable to increase the value and trust of the dealing goods.
Burn-in Test
The burn-in test is often adopted by industries that need life-time testing, and flexible test settings. In the past, users had to prepare more than 10 PCs and incur huge labor cost on maintenance for Burn-in test. Nowadays U-Reach applies Multi-Core Transfer Technology to run all the devices AT ONE TIME! 1. Testing time is adjustable from 30 min to 30 days. 2. Able to set round time of test. 3. Able to set the range of testing on device. 4. Able to set the method of writing.
Sanitization Functions
Erase Functionality Compliant with NIST SP 800-88r1 and DoD 5220-M Standards Secure erase functions wipe drive contents within seconds.
Skip Bad Sectors
End-users are given options to skip bad sectors when performing “Burn-in” or “Erase” Function.
Quality Check Report
Event Log Report is an important asset Management tool to assist users in monitoring and recording the whole quality checking process. It records all details of each task. For example, checking function, working time, model number, serial number of media, read speed and write speed, results…etc. To provide log report as a quality proof is capable to increase the value and trust of the dealing goods.
Supported Interfaces
Direct supports M.2 PCIe M Key, and M.2 B+M key. Compatible with all sizes of NVMe M.2 SSD. (Type 2280/ 2260/ 2242/ 2230/ 22110).
Specification
| Models | PE600HB / PE1100HB / PE1600HB / PE2100HB | ||
| Specifications | |||
| Max. Transfer Speed | 60 GB/min. (1000 MB/sec.) *Actual performance is dependent on device transfer rate. | ||
| Supported Formats | All Partitions/Whole HDD/Percentage: copies all types of formats, both known and unknown. | ||
| Quick Copy: copies FAT16/32/exFAT, Windows (NTFS), Mac (HFS/HFS+/HFSX), and Linux (ext2/3/4). | |||
| Operating Type | Stand-alone, non PC-based operation | ||
| Language Support | English, Japanese | ||
| LCD Display | Backlit Monochrome LCD Display | ||
| LEDs | 3 LED Indicators per Port: Yellow (Power), Green (Pass), Red (Fail) | ||
| Control Panel | 4 Push Buttons (▲, ▼, OK, ESC) | ||
| Features | Copy Modes | Quick Copy, All Partitions Copy, Whole HDD Copy, and Percentage Copy | |
| Skip Bad-Sectors | Manually set (Bad sector) threshold range to skip during copy and erase process. | ||
| Compare Function | Bit-for-bit data comparison. | ||
| Sanitization Modes | Quick Erase, Full Erase, DoD Erase, and Secure Erase | ||
| Special Features | Log Report Management | Event log reports are generated through the USB port and saved to USB devices. | |
| Burn-in Test | Choose durations ranging from 30 minutes to 30 days. | ||
| Image Management (Optional) | Transfer multiple image files from PC to internal storage device in duplicator. | ||
| Compatibilities | Compatible Protocol | NVMe, AHCI, SATA | |
| Compatible Device | w/o Adapters | M.2 (NGFF) M Key & B+M Key. | |
| w/ Adapters | SATA, U.2 (SFF-8639) , MAC PCIe, mSATA, CFast, etc. | ||
| Advanced Formats | Supports MBR, GPT, and advanced formats. | ||
Hardware Specifications | Power Supply | Selectable Voltage 115V or 230V, 50/60Hz | |
| Temperature Range | Operating Temperatures: 0°C ~ 60°C Storage Temperatures: -20°C ~ 85°C | ||
| Humidity Range | Working Humidity: 20% ~ 80% Storage Humidity: 5% ~ 95% | ||
| Certification | FCC, CE, RoHS | ||
**Specifications subject to change without notice.
Function List
| Function List for PE-HB Series | ||
|---|---|---|
| 1. Copy | 1. Source Port | |
| 2. Internal Storage* | ||
| 2. Compare | 1. Source Port | |
| 2. Internal Storage* | ||
| 3. Copy+Compare | 1. Source Port | |
| 2. Internal Storage* | ||
| 4. Erase | 1. Quick Erase | |
| 2. Full Erase | ||
| 3. DoD Erase | ||
| 4. DoD EraseComp | ||
| 5. Secure Erase | ||
| 5. Utility | 1. Show Device Info | |
| 2. Update System | ||
| 3. System Info. | ||
| 4. Calc. CRC64 | ||
| 6. Setup | 1. Start-up Menu | |
| 2. Copy Area | System and Files | |
| ALL Partitions | ||
| Whole HDD | ||
| Percentage(%) | ||
| Deep Analysis | ||
| 3. Copy GPT Backup Area | ||
| 4. Skip Bad Sectors | ||
| 5. Language | ||
| 6. Advanced Setup | 1. Unkown Format | |
| 2. Erase Master | ||
| 3. Erase Pattern | ||
| 4. Skip Erase Errors | ||
| 5. HPA Copy Mode | ||
| 6. Clear HPA at ERASE | ||
| 7. Wait HDD Time | ||
| 8. Lock Key | ||
| 9. Stop Motor Time | ||
| 10. Boot Password | ||
| 11. Delete Disk Signature After Copy | ||
| 12. PCIe Speed | ||
| 13. Target Tolerance | ||
| 14. Clean SSD Before Copy | ||
| 7. Restore Defaults | ||
| 7. Log Manager | 1. Out Today Report | |
| 2. Out Recent Report | ||
| 3. Out Period Date | ||
| 4. Advanced Function | 1. Clear ALL Logs | |
| 2. Setup Password | ||
| 3. Adjust Clock | ||
| 4. Add Watermark at text File | ||
| 8. Burn-In | 1. Run Burn-In | |
| 2. Set Loop Count | ||
| 3. Set Run Time | ||
| 4. Set Test Range | ||
| 5. Set Data Pattern | ||
| 6. Set Bad Limit | ||
| 7. Set Power Off Second Between Loop | ||
| 8. Set Power Off Between Write and Read | ||
| 9. Output Report | ||
| 9. Image Manager* | 1. Copy SSD to Image | |
| 2. Compare SSD with Image | ||
| 3. Show Image Tank | ||
| 4. Show One Image | ||
| 5. Rename One Image | ||
| 6. Delete One Image | ||
| 7. Format Image Tank | ||
*Functions are available when internal SSD is installed.
Video
Product Description
Video
Product Description
The quality of SSD on the market varies greatly. It does not matter if you are a buyer or seller of pen drives, you would need an efficient way to exam/ sort out the quality level of SSD devices. U-Reach provides Burn-in Examinations to satisfy the need of quality checking. Our solution applies multi-core transfer technology. Thus, compare to PC, the QC performance will highly increase with less labor cost.
Event Log Report is an important asset Management tool to assist users in monitoring and recording the whole quality checking process. It records all details of each task. For example, checking function, working time, model number, serial number of media, read speed and write speed, results…etc. To provide log report as a quality proof is capable to increase the value and trust of the dealing goods.
Burn-in Test
The burn-in test is often adopted by industries that need life-time testing, and flexible test settings. In the past, users had to prepare more than 10 PCs and incur huge labor cost on maintenance for Burn-in test. Nowadays U-Reach applies Multi-Core Transfer Technology to run all the devices AT ONE TIME! 1. Testing time is adjustable from 30 min to 30 days. 2. Able to set round time of test. 3. Able to set the range of testing on device. 4. Able to set the method of writing.
Sanitization Functions
Erase Functionality Compliant with NIST SP 800-88r1 and DoD 5220-M Standards Secure erase functions wipe drive contents within seconds.
Skip Bad Sectors
End-users are given options to skip bad sectors when performing “Burn-in” or “Erase” Function.
Quality Check Report
Event Log Report is an important asset Management tool to assist users in monitoring and recording the whole quality checking process. It records all details of each task. For example, checking function, working time, model number, serial number of media, read speed and write speed, results…etc. To provide log report as a quality proof is capable to increase the value and trust of the dealing goods.
Supported Interfaces
Direct supports M.2 PCIe M Key, and M.2 B+M key. Compatible with all sizes of NVMe M.2 SSD. (Type 2280/ 2260/ 2242/ 2230/ 22110).
Video