USB Pen Drive Read / Write Test Tool
H2testw; Read Test; Write Test
U-Reach IntelligentU3 Series is a USB3.0 tester. It supports H2testw and records bad sector, capacity and speed.
USB 3.0 Pen Drive Inspector
-Intelligent U3 Golden Series
USB3.0 Signal Detect
Read / Write Speed Test
Bad Sector Scanning
Real Capacity Check
Quality Check Report
The quality of flash memory on the market varies greatly. It does not matter if you are a buyer or seller of pen drives, you would need an efficient way to exam/ sort out the quality level of USB devices. H2 was the most commonly applied examination software for the industry in the past. H2 can exam the USB drives/memory cards one by one on a PC but with low efficiency. The stability of H2 test is affected by copy quantity and process ability of PC.
U-Reach provides various Quality Examinations to satisfy any need of quality checking. Our solution applies multi-core transfer technology. Thus, you can use the same amount of time to exam batch of flash memory, which greatly improves QC performance.
H2 Test
The H2 test runs test from sector 0 to the last sector by writing and reading. The test pattern is the same as H2testw. Besides, below information will be acquired after examination:
1. The quantity of bad sectors.
2. Filter out devices below write/read speed standard.
3. Filter out devices below bad sector standards.
4. Display the REAL capacity.
H5 Test
The H5 test runs writing and reading test from LBA 0 to the last. During testing, devices are able to set up standards for examination.
1. Minimum read/write speed.
2. The bad-sector tolerance.
3. Range of examination on device.
4. Capacity tolerance.
USB 3.0 Signal Detect
All the USB3.0/3.1 pen drives are downward compatible with USB2.0. It increases the difficulty of distinguishing real USB3.0 signal. U-Reach Intelligent U3 Series offers a quick checking tool, check out the real signal of your pen drives in 5 seconds.
Quality Check Report
Event Log Report is an important asset Management tool to assist users in monitoring and recording the whole quality checking process. It records all details of each task. For example, checking function, working time, model number, serial number of media, read speed and write speed, results…etc. To provide log report as a quality proof is capable to increase the value and trust of the dealing goods.
Swappable Modular Sockets
The handscrew attached faceplates and replaceable sockets make maintenance quick and convenient.
| Models | UB3908G / UB3916G / UB3924G / UB3932G / UB3940G / UB3948G | ||
| Specifications | |||
| Max. Transfer Speed | 10 GB/min. (166 MB/sec.) *Actual performance is dependent on device transfer rate. | ||
| Supported Formats | Whole Media: copies all types of formats, both known and unknown. | ||
| Quick Copy: copies FAT16/32/exFAT, Windows (NTFS), Mac (HFS/HFS+/HFSX), and Linux (ext2/ext3/ext4). | |||
| Operating Type | Stand-alone, non PC-based operation | ||
| Language Support | English, Japanese | ||
| LCD Display | Backlit Monochrome LCD Display | ||
| LEDs | 2 LED Indicators per Port: Green (Pass), Red (Fail) | ||
| Control Panel | 4 Push Buttons (▲, ▼, OK, ESC) | ||
| Features | Copy Modes | Quick Copy (System and Files), Whole Media | |
| Compare Function | Bit-for-bit data comparison. | ||
| Diagnostic Modes | USB 2.0/ 3.2 signal detection | ||
| H2 read/ write test | |||
| H5 read/ write test | |||
| Format Function | Formats device to FAT16 or FAT32. | ||
| Sanitization Modes | Quick Erase, Full Erase and DoD Erase | ||
| Special Features | PC Monitoring | Real-time status monitoring through PC | |
| Log Report Management | Event log reports are generated through the first port and saved to the USB device. | ||
| Write Protect | Requires W-mode USB sticks to reach whole USB write-protected. | ||
| Compatibilities | Direct Supported Device | USB 2.0/ 3.1/ 3.2 pen drive(s) | |
| Require Adapters to Support | external USB-HDD (USB hard drive); SD card; CF card. | ||
| Supported OS | All (Windows, Mac, Linux, and other stand-alone systems). | ||
Hardware Specifications | Power Supply | 12V DC Adapter | |
| Temperature Range | Operating Temperatures: 0°C ~ 60°C Storage Temperatures: -20°C ~ 85°C | ||
| Humidity Range | Working Humidity: 20% ~ 80% Storage Humidity: 5% ~ 95% | ||
| Certification | FCC, CE, RoHS | ||
**Specifications subject to change without notice.
| Function List for Intelligent U3 USB3.0 Golden Series | |||
|---|---|---|---|
| 1. Copy (Data) | |||
| 2. Compare(Data) | |||
| 3. Copy+Compare | |||
| 4. Media Check | 1. Signal+H2+Format | ||
| 2. H2+Format | |||
| 3. H2 | |||
| 4. Signal+H5+Format | |||
| 5. H5+Format | |||
| 6. Setup Range % | |||
| 7. Setup Range MB | |||
| 8. Set ErrorLimit | |||
| 9. Minimum Read Speed | |||
| 10. Minimum Write Speed | |||
| 11. Low Speed Tolerance Time | |||
| 12. Set Capacity Limit | |||
| 5. Signal Detection | 1. USB2 and USB3 | ||
| 2. Only USB3 | |||
| 3. Only USB2 | |||
| 6. Utilities | 1. Information | 1. USB Info. | |
| 2. System Info. | |||
| 2. Erase | 1. Quick Erase | ||
| 2. Full Erase | |||
| 3. DoD Erase | |||
| 3. Do Format | 1. Auto Format | ||
| 2. FAT16 Format | |||
| 3. FAT32 Format | |||
| 4. Calc. CRC64 | |||
| 5. Calc. Hash MD5 | |||
| 6. System Update | |||
| 7. Setup | 1. Start-up Menu | ||
| 2. Copy Area | System and Files | ||
| Whole Media | |||
| 3. Copy GPT Backup Area | |||
| 4. Button Sound | |||
| 5. Active USB Revision | |||
| 6. Target Tolerance | |||
| 7. Asynchronous | |||
| 8. Power Off Time Between Copy+Compare | |||
| 9. Skip Source Bad Sectors | |||
| 10. Delete Disk Signature After Copy | |||
| 11. Check VID/PID | |||
| 12. Language | |||
| 13. Select Speed | |||
| 14. Active Hash | |||
| 15. Minimum Speed | |||
| 16. Check USB Signal Before Copy | |||
| 17. Set to Default | |||
| 8. Log Manager | 1. Out Today Report | ||
| 2. Out Recent Report | |||
| 3. Out Period Date | |||
| 4. Advanced Function | 1. Clear ALL Log | ||
| 2. Setup Password | |||
| 3. Adjust Time/Date | |||
| 9. Write Protect | 1. Copy+WriteProtect | ||
| 2. Copy+Comp+WriteP. | |||
| 3. Set Write Protect | |||
| 4. Set Write Enable | |||
| 5. Show USB WP Info | |||
Videos for Intelligent U3 Series
The quality of flash memory on the market varies greatly. It does not matter if you are a buyer or seller of pen drives, you would need an efficient way to exam/ sort out the quality level of USB devices. H2 was the most commonly applied examination software for the industry in the past. H2 can exam the USB drives/memory cards one by one on a PC but with low efficiency. The stability of H2 test is affected by copy quantity and process ability of PC.
U-Reach provides various Quality Examinations to satisfy any need of quality checking. Our solution applies multi-core transfer technology. Thus, you can use the same amount of time to exam batch of flash memory, which greatly improves QC performance.
H2 Test
The H2 test runs test from sector 0 to the last sector by writing and reading. The test pattern is the same as H2testw. Besides, below information will be acquired after examination:
1. The quantity of bad sectors.
2. Filter out devices below write/read speed standard.
3. Filter out devices below bad sector standards.
4. Display the REAL capacity.
H5 Test
The H5 test runs writing and reading test from LBA 0 to the last. During testing, devices are able to set up standards for examination.
1. Minimum read/write speed.
2. The bad-sector tolerance.
3. Range of examination on device.
4. Capacity tolerance.
USB 3.0 Signal Detect
All the USB3.0/3.1 pen drives are downward compatible with USB2.0. It increases the difficulty of distinguishing real USB3.0 signal. U-Reach Intelligent U3 Series offers a quick checking tool, check out the real signal of your pen drives in 5 seconds.
Quality Check Report
Event Log Report is an important asset Management tool to assist users in monitoring and recording the whole quality checking process. It records all details of each task. For example, checking function, working time, model number, serial number of media, read speed and write speed, results…etc. To provide log report as a quality proof is capable to increase the value and trust of the dealing goods.
Swappable Modular Sockets
The handscrew attached faceplates and replaceable sockets make maintenance quick and convenient.